Home/Products/Accessories
Zubehör: Kondensatbehälter WT, Niederdruck-Testbox itB-LP, Filtertesteinheit itB-10 und Benetzungseinheit it-flush

For your filter integrity testers Accessories and adapters

The right accessories for your test set-up.

Equip your it-02 or ita-02 with vessels, adapters and add-on modules to suit your application – from test water supply and automatic filter wetting to leak testing of sterile bags.

  • Condensate vessel “WT” – configured to suit your requirements
  • Low-pressure test box “itB-LP” – for leak tests on sterile bags
  • Filter test unit “itB-10” – for multiple testing of tank vent filters
  • Wetting unit “it-flush” – for filter cartridges and filter capsules
  • Pressure and reference vessels as well as matching connection adapters
PDFBrochure it-02English · 14 pages · 6.9 MB

Add-on modules for your application

For test water preparation, low-pressure leak testing, multiple testing of tank vent filters and automatic filter wetting.

Kondensatbehälter WT
WT

Condensate vessel “WT”

The WT condensate vessel prepares test water for the Water Flow Test (Water Intrusion) from steam – right at your plant. We adapt the design to your plant set-up and your requirements.

Niederdruck-Testbox itB-LP
ITB-LP

Low-pressure test box “itB-LP”

The itB-LP enables the it-02 to perform leak tests on sterile bags, small tanks and fermenters. The test sequence is controlled by the filter integrity tester.

  • Test pressure: 50–500 mbar
  • Integrated vacuum pump for evacuating the bag under test
Filtertesteinheit itB-10
ITB-10

Filter test unit “itB-10”

For multiple testing of tank vent filters in the pharmaceutical and food industries – several filters in one run.

Benetzungseinheit it-flush für Filterkerzen
For filter cartridges
Benetzungseinheit it-flush für Filterkapsulen
For filter capsules
IT-FLUSH

Wetting unit “it-flush”

The “it-flush” wetting unit automatically prepares filter cartridges and filter capsules for diffusion and bubble point tests. Wetting liquid is passed through the filter membrane with pressure assistance. You set the wetting time in the respective test program.

  • Two versions: for filter cartridges and for filter capsules
  • For liquid and gas filters: liquid filters are usually wetted with water or with the product itself, hydrophobic gas filters with an IPA solution
  • Inlet unit with valve, pressure regulator and pressure gauge; outlet unit with valve, flow restrictor and drain
  • Connection via Tri-Clamp (TC 50.5) and Stäubli coupling to the pressure vessel
  • Existing filter systems can be retrofitted once the connection set-up has been agreed

Vessels and adapters

Pressure vessels and connection adapters for the right test set-up with the it-02 and ita-02.

Edelstahl-Druckbehälter

Stainless steel pressure vessels

For test water in the Water Flow Test (Water Intrusion) or for wetting liquids to prepare liquid filters for diffusion and bubble point tests. Made of electropolished stainless steel 1.4571.

  • 5.7 L, 10 L or 19.5 L – each max. 6 bar
  • Inlet: DIN Stäubli nipple, G1/4"
  • Outlet: Stäubli coupling RBE 03 with shut-off nipple, G1/4"
Tri-Clamp-Adapter

Tri-Clamp adapters

In various sizes, with Stäubli RBE 03 nipple. Stainless steel 1.4404 (AISI 316L).

  • Adp-TC 1,5" (50,5 mm)
  • Adp-TC 3/4" (34 mm)
  • Adp-TC 0,5" (25 mm)
Tri-Clamp-Adapter mit zwei Stäubli-Anschlüssen

Tri-Clamp adapter with two Stäubli connections

For connections when testing liquid filters. Made of stainless steel 1.4404, with a 1.5″ (50.5 mm) Tri-Clamp connection.

  • 1 × nipple
  • 1 × Stäubli shut-off nipple RBE 03
Referenzbehälter it-350-VA für die Volumenmessung
VOLUME MEASUREMENT

Reference vessels for volume measurement

With the right reference vessel you can determine unknown volumes, for example the upstream volume of a filter system.

The it-350-VA reference vessel is included with the it-02 and ita-02. For larger volumes, the it-800-VA and it-5000-VA are available as accessories.

Reference vesselMeasuring range
it-350-VA0.1–3 L
it-800-VA0.3–6 L
it-5000-VA6–35 L

More information in the brochure

Further details on accessories and connection options can be found in the it-02 brochure.

PDFBrochure it-02English · 14 pages · 6.9 MB

The right accessories for you

Tell us what you want to test – we will put together the right accessories for you, directly from the manufacturer.

Flow Test GmbH · Bördestraße 2 · 31135 Hildesheim +49 5121 1023233 info@flow-test.de

Mon–Thu 9 am–5 pm · Fri 9 am–3 pm