Home/Products/PUPSIT
PUPSIT-Systeme: Schema Multi-Use mit ita-02 und Ventilblock und Single-Use-System

Integrity testing before use PUPSIT systems

Testing sterile filters – after sterilisation, before use.

PUPSIT stands for pre-use post-sterilization integrity test: the integrity test of a sterilised filter before it is used. Flow Test supports this test step with matched system solutions for stainless-steel multi-use filter housings and single-use assemblies.

  • Mobile ita-02 test system – battery optional
  • Matched valve and connection configurations
  • Automatic wetting before diffusion and bubble point tests, depending on the configuration
  • Diffusion, bubble point and Water Flow Test (Water Intrusion)
PDFBrochure PUPSIT systemsEnglish · 8 pages · 1.9 MB

Which system suits you?

PUPSIT on multi-use systems

The mobile ita-02 test system and a PUPSIT valve block as filter base form the basis for testing in stainless-steel filter housings. With the optional battery version, operation is also possible without mains power at the point of use. A suitable compressed-air supply is still required.

The valve blocks are designed with low dead volume. We match the connections and valves in the filter base to your filter housings and the intended test sequence.

WATER FLOW TEST (WATER INTRUSION)

Water Flow Test (Water Intrusion) on hydrophobic gas filters

  • Automatic test sequence
  • Integrated test water vessel in the trolley: 5.7 L, 10 L on request
  • Test water quality according to the test and process specifications, for example WFI
  • With a heatable filter housing: drying of the filter cartridge after the test
DIFFUSION / BUBBLE POINT

Diffusion and bubble point on liquid filters

  • Automatic, pressure-assisted wetting before the test
  • Filter housing with vent valve and sensor adapter

System components

Testanlage ita-02
Test system “ita-02”
Ventilblock für den Water Flow Test (Wasserintrusion)
Valve block for the Water Flow Test (Water Intrusion)
Ventilblock für Diffusion und Bubble Point
Valve block for diffusion and bubble point
Heizbares Filtergehäuse
Heatable filter housing

Test set-upSchematic illustration

Testaufbau Water Flow Test (Wasserintrusion) an hydrophoben Gasfiltern
Water Flow Test (Water Intrusion) on hydrophobic gas filters
Testaufbau Diffusion und Bubble Point an Flüssigkeitsfiltern
Diffusion and bubble point on liquid filters

More information on our PUPSIT systems

Multi-use and single-use versions, system components and test set-ups as a PDF download.

PDFBrochure PUPSIT systemsEnglish · 8 pages · 1.9 MB

Qualification and service

IQ/OQ/PQ qualification

We carry out IQ and OQ at our factory and support the PQ at your site. You receive the documentation in German or English.

Maintenance and calibration

We maintain and calibrate your test equipment at your site in Germany and neighbouring countries or at our factory in Hildesheim, using reference measuring equipment that is calibrated every year to German standards (DAkkS). We also offer filter testing and upgrades of existing systems.

Tailored to your process

We tailor each PUPSIT system to your filter housings, connections and process workflows. Contact us for personalised advice directly from the manufacturer.

Your PUPSIT system with Flow Test

Contact us for personalised advice and a quotation directly from the manufacturer.

Flow Test GmbH · Bördestraße 2 · 31135 Hildesheim +49 5121 1023233 info@flow-test.de

Mon–Thu 9 am–5 pm · Fri 9 am–3 pm