Home/Products/ita-02
Filtertestanlage ita-02: Filterintegritätstestgerät it-02 auf dem Trolley

Mobile filter test system ita-02

Filter integrity testing – right at your plant.

The ita-02 combines the it-02 filter integrity tester with a mobile trolley. The vessel and pressure regulator are already integrated, so you can move your test equipment wherever it is needed – from one production system to the next.

With the optional battery version, you can carry out the test on site even without mains power. For operation, connect the system to your compressed air supply.

  • Integrated vessel for test water or wetting liquid
  • Integrated pressure regulator with 8 µm pre-filter
  • Castors with parking brakes; mains operation or optional battery operation
  • Test unit removable from the trolley for maintenance and shipping
DIFFUSION (FORWARD FLOW)BUBBLE POINTPRESSURE DROP TESTVOLUME CHECKWATER FLOW TEST (WATER INTRUSION)LOW PRESSURE TEST ON STERILE BAGS
PDFBrochure ita-02English · 12 pages · 6.3 MB
5,7 Lvessel in the trolley; 10 L on request
up to 7 mfilter testing on tall tanks – directly at the point of installation
> 12.000test reports stored in the instrument
2,5–3 hoperating time with optional battery

Your filter test system on wheels

01

Everything on board

The vessel and the pressure regulator with 8 µm pre-filter are integrated in the trolley. The vessel provides test water for the Water Flow Test (Water Intrusion) or wetting liquid to prepare liquid filters for diffusion and bubble point tests.

02

Flexible in production

With the ita-02, you can take your test equipment wherever it is needed. Castors with parking brakes keep the trolley securely in place during testing.

03

Removable test unit

For maintenance, calibration and shipping, the it-02 can easily be removed from the trolley. We ensure fast, reliable servicing so that your instrument is quickly ready for use again.

04

Easy operation

The 7-inch touchscreen shows the test sequence as a process visualisation and displays the measured values as a real-time graph. Start frequently used test programs directly from an individually configurable quick-access menu.

05

Traceable documentation

User accounts with roles, an audit trail and digitally signed, time-stamped PDF reports support the traceability of your tests. Meets the requirements of 21 CFR Part 11.

06

Report right at the instrument

The integrated thermal printer prints the test report when the test is finished – no ink or toner needed. In addition, the reports can be transferred via LAN to the PC software “it-collect”.

Test methods and additional functions

For liquid and gas filters – filter cartridges, filter capsules and complete filter systems. Additional applications with suitable accessories.

01

Diffusion test (forward flow)

Measures the gas flow through the wetted membrane below the bubble point, in mL/min.

02

Bubble point test

Determines the pressure at which gas breaks through the largest pores of the wetted membrane.

03

Diffusion + bubble point

Both tests combined in one sequence.

04

Pressure drop test

Pressure decay measurement with a resolution of 0.1 mbar.

05

Water Flow Test (Water Intrusion)

Integrity testing of hydrophobic membrane filters with water from the integrated vessel.

06

Volume measurement

Determines unknown volumes in the range of 0.1 to 35 L, such as the upstream volume of a filter system.

07

Automatic wetting

Automatic wetting of filter cartridges and filter capsules to prepare them for diffusion and bubble point tests.

with accessory “it-flush”
08

Low-pressure test on sterile bags

Pressure decay testing of sterile bags at low pressure.

with accessory “itB-LP”
ita-02 mit Benetzungseinheit it-flush für Filterkapsulen und Single-Use-Systeme

Automatic wetting – also for single-use

With the optional wetting unit “it-flush”, you automatically prepare filter cartridges and filter capsules for the subsequent diffusion or bubble point test. Wetting liquid is passed through the filter membrane for this purpose.

You store the wetting time in the respective test program. This allows the sequence to be adapted to the filter type used.

  • For filter cartridges and filter capsules in single-use and multi-use systems
  • Inlet with pneumatic valve, pressure regulator and gauge; outlet with pneumatic valve and flow restrictor
  • Tailored to your filter housings and requirements

All technical data in the brochure

Download the PDF brochure for measurement accuracy specifications, connections, dimensions, set-up drawings and sample test reports.

PDFBrochure ita-02English · 12 pages · 6.3 MB

Scope of delivery

  1. Filter test system ita-02: test unit it-02 on the trolley
  2. Vessel 5.7 L and pressure regulator with 8 µm pre-filter, integrated in the trolley
  3. Reference vessel it-350-VA
  4. USB-C power supply with mains cable
  5. Outlet tube
  6. Filling valve
  7. External pressure sensor
  8. 2 rolls of thermal paper
  9. PC software “it-collect”
  10. Operating instructions

Service from the manufacturer

Maintenance and calibration

We recommend annual maintenance and calibration of the sensors and the pressure control – on site in Germany and neighbouring countries or at our factory in Hildesheim. We use reference measuring equipment that is calibrated every year to German standards (DAkkS).

IQ/OQ/PQ qualification

We carry out IQ and OQ at our factory. At your site, we support PQ, commissioning and staff training. Together with you, we define the test parameters and test programs. Documentation is available in German or English.

Matching accessories

Wetting unit “it-flush”

Automatic wetting for filter cartridges or filter capsules (single-use).

Low-pressure test box “itB-LP”

For pressure decay tests on sterile bags.

Vessel 10 L

Optionally instead of the 5.7 L vessel – for applications with a higher liquid demand.

For potentially explosive atmospheres, the ita-02 is also available in an ATEX version on request.

Interested in the ita-02?

Contact us for personalised advice and a quotation directly from the manufacturer.

Flow Test GmbH · Bördestraße 2 · 31135 Hildesheim +49 5121 1023233 info@flow-test.de

Mon–Thu 9 am–5 pm · Fri 9 am–3 pm